Bronkhorst

Theory and advantages of 'CEM' Vapour Control

At room temperature the liquid (precursor fluid for chemical reactions or water for humidification purposes) is drawn from a container with an inert gas blanket, or membrane, and measured by a liquid mass flow meter. The required flow rate is controlled to the setpoint value by a control valve (C) forming an integral part of the unique liquid flow and carrier gas mixing valve (M). The then formed mixture is subsequently led into the evaporator to achieve total evaporation (E). This explains the abbreviation of CEM viz.: Control - Evaporation - Mixing, the 3 basic functions of Bronkhorst's Liquid Delivery System.
A complete system also incorporates a readout/control unit, including power supply, for operation of the CEM-system devices.

afbeelding
afbeelding

CEM: Controlled Evaporation Mixing

  1. Fast evaporation
  2. Precursor only short period of time at higher temperature
  3. Well-suited for less stable precursors
  4. Pressure and temperature in piping are of no importance
  5. Precursor dosing via liquid flow controller
  6. Precursor in a container at low temperature

Find your vapour control system

BRONKHORST KOREA Co. Ltd

경기도 화성시 동탄순환대로 830 SK
V1 Center 209호
대표자 : 헨드리크제지너스타펠
사업자등록번호 : 119-86-74469

           Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note